GarrettCom - Garrett Communications Door 6K16 Manual De Usuario
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)
15
www GarrettCom com
.
.
On the model 6K8-RJ45 module, there are four LEDs for each port, two in the
connector and two separate. The LK (Link) LED indicates “ready for operation” on that
port when lit. The blinking ACT (Activity) LED indicates receiving Activity on that port
when lit. The 10/100 LED indicates operation at 100Mb speed when ON and at 10 Mb
speed when OFF (when auto-
negotiation is not disabled).
The FDX/HDX LED is ON
to indicate full-duplex
operation and OFF to indicate
half-duplex mode. A twisted
pair cable must be connected
into an RJ-45 port and the Link (LK) indicator for that port must be ON (indicating there
is a powered-up device at the other end of the cable) in order for a LK LED to provide
valid indications of operating conditions on that port.
Using the 6K16-Series (MNS-6K) management software, the user may disable
auto-negotiation and fix the desired operation of each RJ-45 port. User may select 10Mb
or 100Mb speed and full- or half-duplex mode per-port as per user requirement. (See
Magnum MNS-6K Software Manual for details info.).
2.2.4 New PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-
port
port
The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports,
except they have capability of providing power on each port to power up the PD devices,
per the IEEE802.3af PoE
standard. The Power Pass-
through PoE modules are
totally dependent upon the
powerful -48VDC input
power supply to support
more RJ-45 (10/100)
ports. Each port requires
atleast 15watts to power
up the PoE PD devices.
Maxm. one PoE modules
can be configured in the
A, B slot of any 6K16 s
with -48vdc power input.
The PoE modules are also
standard. The Power Pass-
through PoE modules are
totally dependent upon the
powerful -48VDC input
power supply to support
more RJ-45 (10/100)
ports. Each port requires
atleast 15watts to power
up the PoE PD devices.
Maxm. one PoE modules
can be configured in the
A, B slot of any 6K16 s
with -48vdc power input.
The PoE modules are also
available with mix –n-match with fiber modules. Please check the ordering information
Sec.1.2 for all the various P6K PoE modules option.
Sec.1.2 for all the various P6K PoE modules option.
1 3 5 7
10/100
LK
F/H
ACT
10/100
LK
2 4 6 8
F/ H
ACT
6KP8
-45RJ
8 Port@ 10/100Mb Copper ports
4
4
FULL/HALF
1
PoE
LINK
LK
/
ACT
2
3
10/10
2
1 3 5
10/10
LK/AC
1
3
F/H
POE
10/10
LK/AC
2 4
6
F/ H
POE