GarrettCom - Garrett Communications Door 6K16 Manual De Usuario

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 

 

33

.

.

                                     Magnum 6K16, a carrier class focused managed switch can be 
mounted as rack-mount using the following kit options offered for this product – 

K16-RMB    Set of two rack-mount brackets for one 6K16 unit in a 19” RETMA 1U rack 
space, with screws to attach the metal mounting brackets to the case. Can add Model K16-
EXTN-KIT to extend to ETSI and 23” rack width. 

K16-2TRAY    Rack mount tray fro holding two side-by-side 6K16’s in a 19” 1.5U rack 
space, each 6K16 unit individually removable for service. Can add Model K16-EXTN-
KIT to extend to ETSI and 23” rack width. 

K16-EXTN-KIT    Kit of extender brackets for converting one K16-RMB or one K16-
2TRAY to ETSI and/or to 23”  Telco rack. 

The above mentioned rack-mount kits is being designed for Magnum 6K16 only to 
provide the rack-mount support to the carrier class switch and filled the 19” RETMA 1U 
rack space. The K16-EXTN-KIT is specially designed to meet the European Telco 
Standard (ETSI) 23” Telco rack requirement. 

 The pro- carrier class Switch, Magnum 6K16 can be installed single, as it is being shown 
on the above Fig. 3.4a on the K16-2Tray. The empty slot on K16-2Tray can be filled as 
per the requirement. Easy to install the K16-2Tray comes along with all the accessories 
to install securely and quickly.  

The 6K16 Switches are being installed side-by-

side to provide a larger port density, is shown below in Fig 3.4b