Galaxy Metal Gear 65 Manual De Usuario

Accessing DAM

99

• Using the serial connection to the SM and setting the address. See 

H.2.1, ”Configuring the IP 

Settings”, on page 214

.

Once you set the IP address and subnet mask, you can use the steps in the next section to access the 
Disk Array Administrator software.

You can use the RS-232 and Telnet connections at the same time. If a Telnet session is active, you can 
see the activity through the RS-232 connection, and you can make changes to the configuration using 
the RS-232 connection.

You can configure a variety of settings for the Ethernet connection. For more information, see 

H.2, ”Configuring the LAN Settings”, on page 214

.

Set up the IP address and subnet mask as described in 

B.2.1, ”Using the Ethernet Port for the First Time”, 

on page 98

.

At the DOS or UNIX prompt, enter telnet and press Enter.

The exact steps for your Telnet program may be different. The remaining steps work for HyperTerminal 
Private Edition.

Using the Terminal menu, select Preferences.

Select VT100 Arrows option, VT-100/ANSI emulation, and Terminal font. Click OK.

If you are using Windows and Telnet, you must configure the preferences and font from the Terminal 
menu each time as shown below.

Enter the IP address or, using the Connect menu, select the Galaxy 65 IP address from the menu (if 
present) and press Enter.

Click Font to set 
the font as shown 
here.