Emprex M993U Manual De Usuario
M993U/C QG 英
3100506070 v1.0
3100506070 v1.0
1.
Firstly, press the ID button on the bottom of the receiver once.
The receiver indicator at the mouse front side will to wait the signal from the
mouse.
mouse.
ID BUTTON
2.
Then press the ID button on the bottom of the mouse once.
3.
The receiver indicator at the rechargeable set front side will flash quickly
and then stop to show the connecting status.
and then stop to show the connecting status.
Note:
1.
You must follow the procedure above to complete ID setting.
2.
The whole procedure should be completed within 60 seconds, or you will need to start again.
Software Installation
1. Insert the driver CD into your CD-ROM.
2. Run
“SetupKey.exe”.
3. Then follow the on-screen instruction to install the driver. The default install path is set to c:\Program
Files\MMaestro. You have the option to change the install path during set-up.
4. The driver icon
will show on Windows system tray when the installation is complete. The
operating system needs to restart.
Note: Before installing the MouseMaestro input device driver for USB optical mouse, you have to make
sure that the USB device driver has been installed and the USB optical mouse is recognized by
Windows operating system. You may move the mouse to see if it is correspondently, and thus to
know the mouse works well.
Windows operating system. You may move the mouse to see if it is correspondently, and thus to
know the mouse works well.