Eicon Networks V8.3 Manual De Usuario

In the ‘Remote Access Server Setup’ box, select the option ‘Set up an advanced 
remote access server’.

Click ‘Next’.

In the ‘Remote Client Protocols’ box, verify if all protocols required for remote clients 
are installed.

Click ‘Next’.

If you are not connected to a network, the ‘No Network Connections Detected’ box is 
displayed. 

Check the option ‘No, I am setting up a stand-alone server with no access to a 
network’.

Click ‘Next’.

In the ‘IP Address Assignment’ box, specify whether IP-addresses will be assigned 
to remote clients automatically or from a specified range.

Click ‘Next’.

Note:  If you select to assign the IP-addresses from a specified range, enter the 
address ranges in the following dialog boxes.

If your computer is part of a network, the ‘Managing Multiple Remote Access Servers’ 
box is displayed.

Specify if you want to set up your RAS server to use an existing RADIUS server. By 
default, the RADIUS server is not used.

The RADIUS (Remote Authentication Dial-In User Service) protocol is used for 
managing remote user authentication and authorization in dial-up networks or virtual 
private networks. If a RADIUS server is available in your LAN you can have your RAS 
connections authenticated and monitored by this server. You do not need to create 
your own remote access policies.

Click ‘Next’.

10. Click ‘Finish’ to finish the ‘Routing and Remote Access Server Setup Wizard’.

Click ‘Start > Administrative Tools > Routing and Remote Access’.

In the ‘Routing and Remote Access’ window, right-click the entry for your computer 
and select ‘Configure and Enable Routing and Remote Access’.

In the ‘Routing and Remote Access Server Setup Wizard’, click ‘Next’.