Edirol Webcam V-8 Manual De Usuario

 

fig.rear-panel-e.eps

 

●

 

These are BNC connectors that output the final output image as 
a composite video signal.

 

* If the connection cable you’re using has an RCA phono type plug, use 

the included (or commercially available) RCA-BNC adaptors.

 

●

 

This outputs the final output image as an S-video signal.

 

* For channels 5–8, input from the S-video connector will take priority.

 

●

 

These are BNC connectors that input a composite video signal.
Here you can connect video equipment that has composite video 
output connectors.

 

* If the connection cable you’re using has an RCA phono type plug, use 

the included (or commercially available) RCA-BNC adaptors.

 

●

 

These connectors can accept S-video signals.
Here you can connect video equipment that has an S-video 
output connector.

 

●

 

These are D-sub 15-pin connectors for inputting RGB signals. 
Use the [PC INPUT SELECT] switch (p. 11) to choose between 
the PC1 input or PC2 input.

 

☞

 

 

These are BNC connectors that output the composite video 
signal from the images being input to the composite input 
connectors or S-video input connectors.
You can connect these to television monitors that have 
composite video inputs, and use them to view the input image for 
each channel.

 

* The input from the S-video connector will take priority for channels 5–7.

* If the connection cable you’re using has an RCA phono type plug, use 

the included (or commercially available) RCA-BNC adaptors.

 

This is a BNC connector that outputs a composite video signal of 
the image that is being input to the channel 8 S-video connector 
or to the PC1/PC2 input connector.
Here you can connect a television monitor that has a composite 
video input connector, and use it to view the input image.

 

* The input from the S-video connector will take priority for channel 8.

* If the connection cable you’re using has an RCA phono type plug, use 

the included (or commercially available) RCA-BNC adaptors.

 

This is a BNC connector that outputs the composite signal for the 
image selected by the PREVIEW OUT SELECT buttons (p. 11).
If you are previewing an input image from the INPUT 1–8/PC1/
PC2 connectors, the channel number or menu (p. 23) will be 
overlaid on the image.
If you are previewing the final output image, the menu (p. 23) or 
information about the settings (p. 26) will be overlaid on the image.

 

* If the connection cable you’re using has an RCA phono type plug, use 

the included (or commercially available) RCA-BNC adaptors.

* The menu is shown when you press the [MENU] button (p. 10).

 

Use this to connect an external earth or ground.

 

☞

 

 

Fasten the cord of the included AC adaptor to this hook so that 
the cord will not be disconnected accidentally.

 

☞

 

 

Connect the included AC adaptor here.

 

☞

 

 

This turns the power on/off.

 

☞

 

 

You can switch the function of this connector between MIDI OUT 
and MIDI THRU.

 

☞

 

 

●

 

This connector will transmit MIDI messages to an external device.

 

●

 

This connector will retransmit (without change) any MIDI 
messages arriving at the MIDI IN connector.

 

This connector receives MIDI messages from an external MIDI 
device.

 

You can attach a commercially available security lock here. For 
details, refer to the following website:

http://www.kensington.com/

V-8_e.book 13 ページ ２００８年５月１５日　木曜日　午後１時１１分