Edirol Webcam V-8 Manual De Usuario

 

Here’s how to verify that an image is correctly output to the TV monitor connected to the PREVIEW OUT connector that 

you’re using for previewing.

 

fig.preview-select.eps

 

Press the PREVIEW OUTPUT SELECT button of a channel into which an image is being input. Verify that the image 
is correctly shown in the television monitor (preview monitor) connected to the PREVIEW OUT connector.

Successively press the PREVIEW OUTPUT SELECT [1]–[PC/8] and [OUTPUT] buttons, and verify that the image in 
the preview monitor is switched.

* The image in the preview monitor will momentarily be distorted when you switch the preview output, but this will not 

affect the final output.

With the factory settings, selecting a channel for which there is no input will cause the indication “No Signal” to appear 
in the preview monitor. You can use the “Utility” menu item “Preview Signal Check” to turn the “No Signal” indication 
on/off.

* For details on menu operations, refer to “Menu Operations” (p. 23).

You can use the “Utility” menu item “Preview Switch Pattern” to change the way in which the preview output is 
selected.

* For details on menu operations, refer to “Menu Operations” (p. 23).

 

Sends the video being input via the INPUT 1–8/PC1/PC2connectors to the preview output.

* For channels 5–8, the input from the S-video connectors will take priority.

* Use the [PC INPUT SELECT] switch to change between the PC1/PC2 connector inputs.

 

Sends the final image to the preview output.

 

The “No Signal” indication will be output when there is no signal.

You can change the background color by setting the “Utility” menu item “Preview No Signal Color.”

* You can’t change the “No Signal” indication and background color for channel 8.

 

A black image will be output if there is no signal.

 

The image selected by the PREVIEW OUT SELECT button will be sent to preview output.

 

The image of the bus (A or B) not being sent to the final output will be sent to preview output. For example, 
if the bus A image is being sent to the final output, the bus B image will be sent to preview output.

 

The preview output will be fixed at channel 1–8 or at the final output.

While you hold down a PREVIEW OUT SELECT button, the image selected by the button will be sent 
from the preview output.

 

The preview output will be switched automatically. For example, if you set this to “Auto1-4,” channels 1–4 
will be switched automatically and sent to preview output.

You can use the “Utility” menu item “Preview Auto Speed” to change the time at which the preview output 
is switched.

V-8_e.book 22 ページ ２００８年５月１５日　木曜日　午後１時１１分