Edirol Webcam V-8 Manual De Usuario

 

You can use the preview monitor to view the current settings.

These settings are displayed only while the final output image is being sent to the preview output ([OUTPUT] button is lit). 

Settings are not displayed while channels 1–8 are being sent to the preview output.

* You can change the contents of the information that will be displayed. The screen shown below is an example of 

 

fig.preview-screen-e.eps

 

●

 

fig.preview-efx-e.eps

 

If you’re able to use the [CONTROL] fader to change the effect 
settings, a 

 

●

 

 symbol is shown beside the effect name.

* For details on the effects whose settings you can control refer to 

 

●

 

fig.preview-faderB.eps

 

This indication is shown when you’re using the BPM Sync function 
(p. 60).

 

fig.preview-fader-position-e.eps

 

This indication is shown when the position of the video fader differs 
from the actual output.

 

●

 

fig.preview-fade-e.eps

 

When the [CONTROL] faders can be used to fade the bus image 
(p. 31), a 

 

●

 

 symbol is shown beside the “FADE” indication.

Preview output channel

[PC INPUT SELECT] switch setting

BPM setting

“BPM SYNC” menu 

“Speed” setting

[WHITE/BLACK] switch setting

[OUTPUT FADE] fader position

Bus A effect setting and selection 

status

 (highlighted=selected)

TRANSITION button setting and 
selection status

 (highlighted=selected)

Video fader position

[MEMORY] knob selection

Bus A INPUT SELECT button selection

Bus B INPUT SELECT button selection

Bus B effect setting and selection 
status

 (highlighted=selected)

Bus A [TRANSFORMER]

 button setting

Bus B [TRANSFORMER] 
button setting

● symbol

Value of effect setting

Actual output

Physical video fader position

● symbol

Bus output level

•

You can cause the settings to be hidden while you hold down the [OUTPUT] button.

•

V-8_e.book 26 ページ ２００８年５月１５日　木曜日　午後１時１１分