Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Edirol
  4. Webcam V-8
  5. Manual De Usuario

Edirol Webcam V-8 Manual De Usuario

Descargar
Página de 116
 
Switching Between Images 
 
(continued)
 
40
 
Here’s how you can use the [TRANSFORMER] buttons to switch images without using the video fader.
 
1
 
Set the [MEMORY] knob to memory number 1.
 
* The factory preset settings are assigned to memory number 1. For details on 
 
2
 
Use the INPUT SELECT buttons to select the images that you want to input to bus A and bus B.
 
* When you use the [PC INPUT SELECT] switch to switch the PC input, it will take some time for the input to stabilize. 
We recommend that you use a monitor to verify the image.
 
3
 
Operate the video fader to output either bus A or bus B.
 
Set the video fader all the way to either bus A or bus B.
 
4
 
Press a [TRANSFORMER] button to switch between the bus A or bus B images.
 
If the video fader is in the bus B position:
 
The bus A image will be output only while you hold down the bus A 
[TRANSFORMER] button. 
 
If the video fader is in the bus A position:
 
The bus B image will be output only while you hold down the bus B 
[TRANSFORMER] button.
* With the factory preset settings, the [TRANSFORMER] buttons are assigned to operate as follows.
* You can change the operation (the image switching pattern) produced by pressing the [TRANSFORMER] button. 
You can also assign a TRANSITION button or EFFECTS button to the [TRANSFORMER] button, and use it to 
control a transition or effect. 
For details, refer to refer to “Changing the assignment of the [TRANSFORMER] buttons” on the following page.
 
Menu item
Setting
Details
 
Transformer-A
 
02: Trans
The image of the bus whose [TRANSFORMER] button you hold down will 
be output.
 
Transformer-B
 
02: Trans
Using the [TRANSFORMER] Buttons to Switch Images
Bus A
Bus B
If you’ve selected the [PC/8] button
Use the [PC INPUT SELECT] switch 
to change between the PC1 and PC2 
connector inputs.
V-8_e.book 40 ページ ２００８年５月１５日　木曜日　午後１時１１分