Edirol Webcam V-8 Manual De Usuario

Descargar
Página de 116
 
43
 
Using Effects 
 
(continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
es
Eff
ects
BPM sync
External de
vices
Video fader
Appendices
 
You can use Picture In Picture (P in P), Chroma-key, or Luminance-key to combine the images of bus A and bus B.
The image of the bus to which you apply the Picture In Picture (P in P) effect becomes the subscreen image, which will be 
displayed in miniature over the image of the other bus (the background image).
 
1
 
Set the [MEMORY] knob to memory number 1.
 
* The factory preset settings are assigned to memory number 1. For details on 
 
2
 
Press a bus A INPUT SELECT button to select the background image.
 
3
 
Press a bus B INPUT SELECT button to select the subscreen image.
 
4
 
Press the bus B EFFECTS [4 (P in P)] button to turn on the P in P effect.
 
The [4 (P in P)] button will blink.
 
5
 
Move the video fader to the bus B position.
 
The bus B image will be the subscreen image, and will be combined with the bus A image (background image) and 
output.
 
6
 
Operate the bus B [CONTROL] fader to change the position of the subscreen.
 
* The blinking of the [4 (P in P)] button indicates that you can use the 
[CONTROL] fader to change the position of the subscreen (eight types).
The position of the subscreen will reflect the “142: PinP1”–“149: PinP8” setting 
(p. 44).
 
7
 
Press the [4 (P in P)] button once again to turn off the P in P effect.
 
The [4 (P in P)] button will go out.
 
Using Picture In Picture (P in P) to Combine Images
Combining Two Images
For each bus, you can use up to four effects simultaneously. However, there are some combinations of effects that cannot 
When you turn the PinP effect on, the transition effects for the TRANSITION buttons will all be temporarily set to “Mix01.”
When using P in P to composite the images of bus A and bus B as described above, you can’t use the bus A [CONTROL] 
V-8_e.book 43 ページ 2008年5月15日 木曜日 午後1時11分