Edirol Webcam V-8 Manual De Usuario
55
Editing the Input/Output Settings
(continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
es
Eff
ects
ects
BPM sync
External de
vices
Video fader
Appendices
The V-8 supports the following resolutions.
*1 This is a resolution for the Macintosh. Other resolutions are common to both Windows and Macintosh.
*
Depending on the resolution of your computer, text may be difficult to read. In this case, lower the resolution.
With the factory settings, the Auto Detect function, which automatically detects the input resolution, is turned “On.”
Normally, you can leave Auto Detect turned “On.”
If, as shown in figure 1, the background color of the computer screen is black and an image
is being displayed in a portion of the screen, the resolution may not be detected correctly.
In this case, take the following steps.
Set a window, etc. on the computer to full screen mode (figure 2).
After a brief interval, the input resolution will be automatically detected, and the output
image will be resized.
In the “PC Input Setup” menu, turn the “Auto Detect” setting “Off.”
Automatic detection of the input resolution will be turned off.
Display the original image (figure 1).
About the input resolution
Resolutions
640 x 480
800 x 600
832 x 624 *1
1024 x 768
Maximum refresh rate
120 Hz
120 Hz
75 Hz
80 Hz
Resolutions
1152 x 864
1152 x 870 *1
1280 x 1024
1600 x 1200
Maximum refresh rate
80 Hz
75 Hz
75 Hz
60 Hz
Automatically detecting the input resolution (Auto Detect)
figure 1
figure 2
When moving images from a PC input are displayed, skewed or flickering images may occur. This is called “tearing,” and
is caused by discrepancies in the timing at which the images are rendered, so that a portion of the previous frame is shown
simultaneously with the next frame.
is caused by discrepancies in the timing at which the images are rendered, so that a portion of the previous frame is shown
simultaneously with the next frame.
The illustration below is a conceptual example of tearing.
* If the “STILL” or “STROBE” effects are used on moving images input from a PC, a state in which tearing has occurred
may be frozen.
Skewed or Flickering Images (Tearing)
Input image
Output image
V-8_e.book 55 ページ ２００８年５月１５日 木曜日 午後１時１１分