Edirol Webcam V-8 Manual De Usuario
75
Using the V-8 with Other Equipment
(continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
es
Eff
ects
ects
BPM sync
External de
vices
Video fader
Appendices
By switching the V-8’s operating mode to “PR Control mode,” you’ll be able to control the V-8 from an Edirol PR-80/50
(subsequently referred to as the PR series device) via MIDI.
(subsequently referred to as the PR series device) via MIDI.
In PR Control mode, you’ll be able to perform the following operations from the PR series device.
●
Switch between the image being input to the V-8 and the image of the PR series simply by operating the PR series device.
●
Use the Scheduler function of the PR series unit to operate the V-8 automatically.
Use version 1.2 or later for the PR series.
* For details on settings and operation for the PR series, refer to the PR series owner’s manual.
1
Press the [MENU] button to access the menu, and select “MIDI Setup.”
2
Use the [
] [
] buttons to select “PR Control,” and press the [ENTER] button.
3
Use the [
] [
] buttons to select “On.”
When this is “On,” you’ll be able to control the V-8 from the PR series unit.
4
Press the [MENU] button several times to close the menu.
Connection example
Switching to PR Control mode
Using the V-8 in Conjunction with the PR Series
(PR Control mode)
V-8 Rear panel
Composite or S-Video
Composite or S-Video
PC1 or PC2
MIDI IN
USB MIDI Interface
(UM-1EX etc.)
PR-80/50
Computer
DV camera etc.
V-8_e.book 75 ページ ２００８年５月１５日 木曜日 午後１時１１分