Cyclades PM IPDU Manual De Usuario

        Cyclades PM IPDU Installer/Administrator/User Guide

To turn on and off the syslog notification, enter the following as necessary.

The temperature command displays the Cyclades PM IPDU’s surrounding temperature and the 
maximum temperature the unit has registered (temperature peak). It may also be used to clear the 
saved peak temperature value.

temperature [<IPDU#>|<IPDU_ID>]|reset

<IPDU#> 

IPDU number in a daisy chain

<IPDU_ID> 

Identification string previously set by the id command

reset

 

Resets the maximum temperature registered

To get the temperature for all units in a daisy chain, enter the following.

To get the temperature for specific unit, provide the unit number as an argument, enter 
the following.

To reset the maximum temperature registered, use reset as a argument, enter the following.

pm>syslog on

Syslog turned ON on IPDU #1

Syslog turned ON on IPDU #2

pm>syslog off

Syslog turned OFF on IPDU #1

Syslog turned OFF on IPDU #2

pm> temperature

IPDU #1: Temperature: 36.1°C (96.9°F). Maximum: 36.1°C (96.9°F).

IPDU #2: Temperature: 20.0°C (68.0°F). Maximum: 25.0°C (77.0°F).

IPDU #3: Does not have temperature sensor.

pm> temperature 2

IPDU #2: Temperature: 20.0°C (68.0°F). Maximum: 25.0°C (77.0°F)

pm>temperature reset

IPDU #1: Clearing maximum recorded temperature to zero.

IPDU #2: Clearing maximum recorded temperature to zero.