CycleOps Club Pro 300PT Manual De Usuario

9

Chain
Over time, the chain on your indoor cycle will require additional lubrication.  It is 
recommended that you lube the chain every six months to maximize chain life. 
To lubricate the chain on your indoor cycle, use the lubrication port that is at the 
back of the chain guard Liberally spray a Tefl on-based lubricant onto the chain.  
Be sure each link gets lube. Be careful not to over-lubricate the chain as excess lube 
will drip out of the chain guard and can stain fl oors/carpet. 

Nuts & Bolts
It is recommended that you put a light coating of lithium grease on the threads of the 
following hardware to ensure proper tightening and to prevent the parts from seizing 
over time:
•Stabilizer bolt threads
•Rubber feet threads
•Pull-pin threads
•Pedal spindle threads

Pull the old resistance knob out of the 
handlebar.

Insert new resistance knob, paying 
attention to fi shing the cable and 
housing through the handlebar.

Tighten the setscrew underneath to 
secure the knob in the handlebar.

Insert cable through the hole in the slider 
and through brass cable stop.

See CABLE ADJUSTMENT for instructions 
on properly adjusting the resistance cable.

Lube Port