CycleOps PRO 300PT Manual De Usuario

24

1) From [MAIN MENU] press [DOWN ARROW] to scroll
to through to [SETUP] and press [SELECT].

2) Press [SELECT] to enter [MODES].

3) Press [SELECT] to enter [SLEEP TIME].

4) Press [UP ARROW] or [DOWN ARROW] to toggle between 1-9 (displayed in
minutes).  This determines duration of time before the console goes to sleep
without input from the bike or a heart rate signal is detected.  Press [SELECT] to
accept changes and reenter scrolling menu.  

5) Press [DOWN ARROW] to scroll to [COMP MODE] and press [SELECT].

6) Press [DOWN ARROW] to toggle between [200E] or [PT300].  Select setting
depending CycleOps Indoor Cycle model you own.  Press [SELECT] to accept
changes and reenter scrolling menu.  

7) Press [DOWN ARROW] to scroll to [RECORD CNTR] and press [SELECT].

8)  Press [DOWN ARROW]  to  toggle between [SPEED] and [HEART].  Press
[SELECT]  to accept  changes and reenter scrolling menu.  This function sets
when the ride time clock auto starts and stops.  In [SPEED] mode, the run time
clock will stop when speed reaches zero.  In [HEART] mode, the run time clock
time will continue to record as long as heart rate signal is detected.

9) Press [DOWN ARROW] twice to scroll to [BACKLIGHT] and press [SELECT].

10) Press [DOWN ARROW] to select either [UI], [UI DATA] or [OFF].  This function
determines when the backlight will be illuminated.  [UI] = User Interface (when
buttons are pushed), [UI DATA] = User Interface and Data input, [OFF] =
Backlight is never illuminated.  Press [SELECT] to accept changes and reenter
scrolling menu. NOTE: Use of backlight will reduce battery life.

11) To reset user settings select press [DOWN ARROW] and press [SELECT].

12) Press [DOWN ARROW] to scroll to [RETURN] and press [SELECT] to return to
[MAIN MENU].

SELECT

MODE

SELECT

MODE

Setup (Modes)

Changes made in setup mode apply to ALL users.