CyberHome Entertainment Cyber Home CH-DVD500 Manual De Usuario

The ANALOG setting controls the DVD Player’s Analog Audio Outputs. 
These are the Stereo Audio and 5.1 Channel Outputs covered on pages 
11, 13 & 15. Select 5.1CH if you are using the 5.1 Channel outputs to 
connect to a Dolby-Ready Receiver or Speaker System. If you are 
using a TV for audio or a stereo system with only two channel inputs, 
this setting should be switched to 2CH, allowing you to hear all 
channels of Dolby/DTS 5.1 soundtracks through two speakers. 

Sometimes called “midnight mode”, D.R.C (Dynamic Range Compression) aims to make watching a movie at low 
volumes more enjoyable by boosting the quieter sounds while suppressing the louder sounds. This reduction in the 
difference between the low and high audio levels is known as “compression”. You can adjust the level of this 
compression in three levels: MAXIMUM - Highest compression, STANDARD - Normal compression, and TV MODE - 
Optimized for smaller speakers.  

LANG.

VIDEO

AUDIO

      CHILD

OTHERS

EXIT

ANALOG

DIGITAL

D.R.C

BASS

ENTER RETURN SETUP

5.1CH

DOLBY/DTS

STANDARD

OFF

Most DVDs are produced with Dolby or DTS 5.1 Channel soundtracks. 
So, normally this setting should be at the default of DOLBY/DTS. 
However, this setting can be set to LPCM to support DVDs featuring 
this type of audio format. LPCM, or Linear Pulse Code Modulation, is a 
stereo digital audio format typically used only with CD audio.

You can tailor the bass response of your Sub-Woofer different room sizes with the BASS setting. The options are: 
OFF - No additional processing of the sub-woofer signal, SMALL - Adjusts the sub-woofer output for small rooms, 
and LARGE - Adjusts the sub-woofer output for large rooms. 

32