Crestron electronic C2N-DAP8RC Manual De Usuario

Crestron C2N-DAP8RC  

Digital Audio Processor with Room Control 

• 5      

The parametric equalizer consists of eight channels (one for each speaker) of six 
bandpass filter sections that permit you to correct for acoustic anomalies in the 
listening area or in the speakers themselves, and/or to establish preset values that 
enhance the sound conditions for favorite music or recording types.  

The six bands are identical in function. Each delivers up to 12 dB of boost or 
attenuation, has an adjustable bandwidth control (from .02 octaves to 2 octaves), and 
a center frequency control range from 10 Hz to 20 kHz. Use each band anywhere in 
the audio spectrum, not just pre-selected ranges as typically found on graphic 
equalizers. In addition, you can select from among five filter types (low pass, high 
pass, EQ filter, bass shelf, and treble shelf) or select no filter.  

The C2N-DAP8RC also functions as a Cresnet

®

 room control interface to local AV 

and other devices such as TVs, projectors, VCRs, and DVD players. The unit may 
receive video and digital audio from the Crestron CNX-PVID8, as well as analog 
audio from the CNX-BIPAD8, all via CAT5 cabling. In addition, it receives video, 
digital audio and analog audio from local sources via standard RCA connections. 
The unit’s built-in audio/video matrix switcher distributes these inputs to local 
outputs.  

One bi-directional RS-232 and four IR ports are provided. A current sensor input 
accepts power status feedback from the optional CNXRMCS current sensor 
(available separately). In addition, a powered IR input allows connection of the 
optional CNXRMIRD IR sensor (available separately) to receive IR commands from 
a Philips Pronto

®

 with RC5 commands or a similar universal remote control, which 

may be programmed to control any device connected to the Cresnet system. 
Naturally, any Crestron touchpanel or pushbutton control panel may be used with the 
C2N-DAP8RC as well. 

Finally, the unit provides outputs for directing video and analog audio back to the 
head end. 

The following table summarizes the specifications for the C2N-DAP8RC. 

Power Requirements 

21 Watts (0.875 Amp @ 24 VDC)  

Default Net ID 

50 

Control System Update Files

 1, 2 

  2-Series Control System 

Update File 

 
 
Version 3.044.CUZ or later 

C2N-DAP8RC Firmware 

C2N-DAP8RC.1.04.44d.upg or later 

Audio I/O 
 AUDIO 
 

S/PDIF – A, B 

 

OPTICAL – C, D 

 

AUDIO IN – 2 to 6 

 
RJ-45 Stereo differential I/O – Connects to CNX-BIPAD8 
2 RCA connectors for coax digital input (S/PDIF) 
2 Toslink fiber optic inputs (S/PDIF) 
10 RCA connectors for 5 local stereo input sources 
 

Input level = 2.5 V

RMS

 

 

Input impedance = 50K Ohms