Crestron electronic QM-FTCC Manual De Usuario

FlipTop Computer Center 

 

 

Crestron QM-FTCC 

Tools Required 

• 

Phillips screwdriver 

• 

Small flat-blade screwdriver (for connecting the VGA cable) 

The cable support plate must be installed before mounting the QM-FTCC to a 
surface. The cables are looped through the cable support plate. 

1.  Remove the blank bottom plate and retain the four #4 x ¼ LG black 

mounting screws (four #4 x ¼ screws are included with the  
QMI-FTCMK). 

2.  Place the bushings on the cables (six bushings supplied). Use the large 

bushing for the VGA cable. 

3.  Thread the cables through the appropriate slot on the plate. 

4.  Snap the bushings into the plate slots. 

5.  Feed all the excess cable through the opening. 

6.  Attach the plate using the four #4 x ¼ LG black mounting screws 

retained in step 1 (use the four #4 x ¼ screws included with the  
QMI-FTCMK). 

7.  Connect the cables to the appropriate connector on the front of the  

QM-FTCC. 

8.  The cables may be secured to the bottom bar using the supplied tie 

wraps. 

• FlipTop Computer Center: QM-FTCC