Crestron electronic QM-FTCC Manual De Usuario
Crestron QM-FTCC
FlipTop
Computer
Center
FlipTop Computer Center:
QM-FTCC
QM-FTCC
Introduction
Features and Functions
The QM-FTCC FlipTop Computer Center is part of the Crestron
MediaManager™ line of network devices, room control systems and signal
routing solutions. It is available in six different models.
MediaManager™ line of network devices, room control systems and signal
routing solutions. It is available in six different models.
Models
DESCRIPTION MODEL
NUMBER
COLOR
QM-FTCC-B Black
Domestic Models
with Keypad
with Keypad
QM-FTCC-BALUM Brushed
Aluminum
QM-FTCC-NB-B
Black
Domestic Models
without Keypad
without Keypad
QM-FTCC-NB-BALUM
Brushed Aluminum
QMI-FTCC-B Black
International Models
with Keypad
with Keypad
QMI-FTCC-BALUM Brushed
Aluminum
The international models accommodate a wide variety of international AC
adaptors. For simplicity within this guide, the color/button suffix and
international designation are omitted and QM-FTCC is used except where noted.
adaptors. For simplicity within this guide, the color/button suffix and
international designation are omitted and QM-FTCC is used except where noted.
Functional Summary
• Built-in engravable* keypad with 10 to 20 buttons with LEDs
• One AC power passthrough
• One computer RGB connector with component video detect and auto
• One AC power passthrough
• One computer RGB connector with component video detect and auto
sync sensing
• One computer audio connector
• One RJ-45 Ethernet passthrough port
• Two MIC inputs with phantom power and line level inputs (on the
• One RJ-45 Ethernet passthrough port
• Two MIC inputs with phantom power and line level inputs (on the
bottom side)
• One QuickMedia RJ-45 connector (on the bottom side)
• Two Cresnet connectors (on the bottom side)
• Two Cresnet connectors (on the bottom side)
* As an option, custom-engraved buttons can be designed and obtained by using the
Crestron Engraver software. Version 2.2.2.3 and Crestron Database 16.3.4 or later are
available from the Crestron website (www.crestron.com).
Crestron Engraver software. Version 2.2.2.3 and Crestron Database 16.3.4 or later are
available from the Crestron website (www.crestron.com).
Operations & Installation Guide – DOC. 6313A
FlipTop Computer Center: QM-FTCC
• 1