Crestron electronic Isys G-Series TPS-15G-QM Manual De Usuario

 Isys

®

 G-Series Touchpanels 

 Crestron TPS-12G/15G/17G-QM

4.  The TPS-12G-QM can be powered via the 24 VDC jack or the NET port. Be sure to use a Crestron 

approved power supply as another may cause damage. The TPS-17G-QM connects to the Cresnet 
control network and remote power supply via the TPS-17G-QM/-L-IMC Power Interface Module 
(included with the TPS-17G-QM).  
CAUTION:  Do not connect the TPS-17G-QM directly to the Cresnet network bus. 

5.  This port not used by the TPS-15G-QM, which instead, must be powered via Cresnet connector only, 

using CNPWS-75 or C2N-SPWS300 power supply (sold separately). The TPS-17G-QM may be 
powered via this port or via the TPS-17G-QM/-L-IMC Power Interface Module (included) using the 
power supply provided. 

6.  The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and 

microphone signals. The QM input port conforms to the 568B wiring standard. Refer to the following 
table for connector pinouts. 

 

1 WHITE/ORANGE 

- RGB RED 

-  CHROMINANCE (- P

r

) 

2 

ORANGE 

+ RGB RED 

+ CHROMINANCE (+ P

r

) 

3 WHITE/GREEN 

- RGB GREEN 

-  LUMINANCE (- Y) 

4 

BLUE 

+ DIGITAL AUDIO 

+ AUDIO  

5 WHITE/BLUE - DIGITAL AUDIO 

-  AUDIO  

6 

GREEN 

+ RGB GREEN 

+ LUMINANCE (+ Y) 

7 WHITE/BROWN 

- RGB BLUE 

-  COMPOSITE (- P

b

) 

8 

BROWN 

+ RGB BLUE 

+ COMPOSITE (+ P

b

) 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•  Isys