Crane Merchandising Systems Hot Beverage Maker 670 Manual De Usuario
HOT DRINK SETUP/PROGRAMMING GUIDE
6700001
Page - E11
November, 2002
APPENDIX E. CLEAN THE HOT WATER TANK
APPENDIX E. CLEAN THE HOT W
A
TER T
ANK
Some smell and/or taste problems may occur in new machines. Follow this
procedure to clean the hot water tank if you experience problems:
procedure to clean the hot water tank if you experience problems:
1.
If the machine is in service, remove power from the machine.
2.
Dissolve 1 tablespoon of common baking soda in a cup of water.
WARNING
The water tank may be HOT. Be careful when working on
the tank.
the tank.
3.
Loosen or remove the hot water tank lid and pour the baking soda
solution into the tank.
solution into the tank.
4.
Apply power to the machine.
5.
If the tank is not full, fill it.
6.
Allow the tank to reach its operating temperature.
7.
Leave the solution in the tank for AT LEAST ½ hour. If possible, leave
the solution in the tank for 1 hour.
the solution in the tank for 1 hour.
8.
Drain the tank.
9.
Refill the tank, then drain again.
10.
Refill the tank and put the machine back into service.