Crane Merchandising Systems Hot Beverage Maker 670 Manual De Usuario

November, 2002

Page - 42

6700001

To vend a cup only, press 1, 2, 3 (large size) or 2, 3 (regular size).

8. Continue

Be sure that the cup sizes you set in (setup cup sizes page, ), agree with the
cup sizes actually in your machine.  All procedures for setting up the hot
drinks are similar, so this example will demonstrate how to set up the A
selection, regular size fresh brew coffee.

1.    Press 

 , then press

  until the display shows 

SETUP  - 

*

.

The star (

*

) represents the selection (A, B, etc.).  The dash (

-

) represents

the size of the selection.

2. Press A.  (If you were setting up the A selection for the large size drink,

you would press 1 first, then A.)  The display shows 

WAT. A 12.00.

This means that the currently set water throw time for the A selection
is 12.00 seconds.  Enter a new time if desired.

3. Press 

 .  The display shows 

DRY. A .60.  This means that the

currently set dry product throw time for the A selection is .60 seconds.
Enter a new time if desired.

4. Pressing 

  after each display will cause the following screens to

appear:

DRY. A+ View and change the settings for an extra strong drink
SUG. A View and change the settings for the sugar throw time
SUG. A+ View and change the settings for extra sugar throw time
LIT. A

View and change the settings for the lightener throw time

LIT. A+ View and change the settings for extra lightener throw time
SUB. A View and change the settings for the sugar sub throw time
SUB. A+ View and change the settings for extra sugar sub throw time
STP. A View and change the steep time
STP. A+ View and change the steep time for an extra strong drink
AIR. A

View and change the air compressor/pump running time

DLY. A View and change the amount of time after the vend to open

the auto vend door