Crane Merchandising Systems Hot Beverage Maker 6530006 Manual De Usuario
Hot Drink Center Set-Up Manual
6530007
C-1
March, 2001
APPENDIX C. DEX/UCS INTERFACE OPERATION
Connect your portable data collection device (PDCD) to the harness hanging
inside the monetary door, and operate it per its instructions.
inside the monetary door, and operate it per its instructions.
SELECT DATA TRANSFER METHOD:
6.
Press
. The display shows: ENTER CODE. You must enter the four-
digit supervisor code within 6 seconds to gain access.
NOTE
A new machine has a factory-set supervisor code of 0000.
When you have entered the right code, you will hear two beeps and see
SUPERVISOR in the display.
SUPERVISOR in the display.
7.
Press
until the display shows DEX+CLR or DEX ONLY.
DEX+CLR = Data will be cleared after collection is complete.
DEX ONLY = Data will remain in merchandiser memory after collection is
DEX ONLY = Data will remain in merchandiser memory after collection is
complete.
NOTE
A third selection - PRINTER - is available, but selecting it will
disable the dex/ucs interface.
disable the dex/ucs interface.
8.
Press
to switch between the two options.
9.
Press
to exit.
This procedure does not need to be repeated unless you desire to change the data
transfer option. However, it might be prudent to check the setting prior to down-
load to ensure unintentional clearing of data.
transfer option. However, it might be prudent to check the setting prior to down-
load to ensure unintentional clearing of data.
DOWNLOAD DATA:
1.
Press
. The display shows DEX.MODE while data is being trans-
ferred.