Country Home Products ELECTRIC WOOD SPLITTER Manual De Usuario

Descargar
Página de 34
24         DR
® 
WDS 6.3, 6 -TON ELECTRIC WOOD SPLITTER
 
 
 
 
WHEN PERFORMING ANY MAINTENANCE, YOU MUST FIRST UNPLUG THE WOOD SPLITTER FROM THE 
POWER SOURCE AND MAKE SURE THE HYDRAULIC SYSTEM IS DEPRESSURIZED AND THE FLUID HAS 
COOLED.  READ THE "GENERAL SAFETY RULES" (CHAPTER 2) OF THIS MANUAL BEFORE PERFORMING 
ANY REPAIRS OR MAINTENANCE.
 
 
 
S
YMPTOM
 
P
OSSIBLE 
C
AUSE
 
Ram advances with 
a jerky motion or 
with strong 
vibrations.  
⇒  Check the possible causes for the Ram operation symptom on the previous page. 
⇒  Check the hydraulic fluid level; see page 20. 
⇒  Bleed any accumulated air from the hydraulic system.  See page 20, Step 5.  If the 
problem persists, call 1(800) DR-OWNER (376-9637) for assistance. 
Hydraulic fluid 
leaking from the 
Ram or other 
external parts. 
⇒  Check that the Bleed Screw has been tightened before moving the machine.  Use 
care:  Do not over tighten and strip the Bleed Screw Threads. 
⇒  The hydraulic fluid seals may be worn.  Call 1(800) DR-OWNER (376-9637), or a 
qualified hydraulic mechanic for assistance to replace worn components. 
 
NOTE:
  
Country Home Products, Inc. has provided Parts Lists and Schematic Diagrams as reference tools only. 
CHP makes no representation or warranty of any kind to the buyer that he/she is qualified to make 
any repairs to the product or that he/she is qualified to replace any parts of the product.  In fact, CHP 
expressly states that all repairs and parts replacement should be undertaken by certified and licensed 
technicians and not by the buyer.  The buyer assumes all risk and liability arising out of his/her repairs 
to the original product or replacement parts thereto, or arising out of his/her installation of 
replacement parts thereto.