Fusion Electronics Car Stereo System MS-AV700 Manual De Usuario
25
USB SOURCE SCREEN
An example of a typical USB flash drive input source screen is shown in
Figure 5 below.
Figure 5 below.
CONTROLLING USB FLASH DRIVE PLAYBACK
Selecting audio tracks from USB flash drive
You can store audio tracks (MP3 format only) on a USB flash drive for
playback on the 700 Series. Audio tracks can be stored in folders on the
flash drive and selected for playback, as required. The flash drive must be
formatted to FAT32 or NTFS format (these are the most commonly used
flash drive format).
For example, to select a Folder then track.:
playback on the 700 Series. Audio tracks can be stored in folders on the
flash drive and selected for playback, as required. The flash drive must be
formatted to FAT32 or NTFS format (these are the most commonly used
flash drive format).
For example, to select a Folder then track.:
Play status indicator
Playback mode
indicator:
Shuffle Repeat
(if active)
indicator:
Shuffle Repeat
(if active)
Track Duration
Progress bar
Figure 5 – Example USB flash drive source screen
Current track
details
Current time
Current track
number out of total
number in folder
Elapsed time
Press
Menu key
If your flash drive
has not been
named, the default
name is disk.
Press Encoder to
select KINGSTON.
Files and folders on
the flash drive are
displayed.
Turn Rotary
Encoder to scroll
the highlight.
Press Encoder to:
• select Folder
then track for
playback.
then track for
playback.
Menu
exit. See
“Menu Key
Operation”
Operation”
on page 6.