Fusion Electronics Car Stereo System MS-AV700 Manual De Usuario
41
Important: If a Zone is disabled, you cannot change any of the following
settings for that Zone.
settings for that Zone.
Volume control
Zones 3 and 4 can have volume control disabled. You should disable volume
control for a Zone that has its volume controlled from another amplifier or
Head unit. If volume control is:
control for a Zone that has its volume controlled from another amplifier or
Head unit. If volume control is:
• Enabled: turning the Encoder will change line level output for the
selected Zone only.
• Disabled: turning the Encoder will not change line level output for the
selected Zone.
selected Zone only.
• Disabled: turning the Encoder will not change line level output for the
selected Zone.
To enable or disable volume control:
a. Select the Volume Control menu item.
b. Press the Encoder to enable ( ) or disable ( ) volume control.
c. Press any key to exit
b. Press the Encoder to enable ( ) or disable ( ) volume control.
c. Press any key to exit
Link to zone 1
Zones 1 and 2 can be linked so that any volume or sub-woofer level changes
are applied to both Zones. A small “+” sign is displayed on screen between
Zones 1 and 2 when this feature is enabled.
are applied to both Zones. A small “+” sign is displayed on screen between
Zones 1 and 2 when this feature is enabled.
To link Zone 2 level to Zone 1 level:
a. Select the Link to zone 1 menu item.
b. Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.
c. Press any key to exit
b. Press the Encoder to link the two Zones ( ) or unlink ( ) the Zones.
c. Press any key to exit
Balance
To specify the balance for the selected Zone:
To specify the balance for the selected Zone:
a. Select the Balance menu item.
b. Turn the Encoder to the left or right to adjust the Balance for the selected Zone.
c. Press any key to exit
b. Turn the Encoder to the left or right to adjust the Balance for the selected Zone.
c. Press any key to exit