Furuno IB-681 Manual De Usuario

Set subscriber number at the FELCOM *51* ...#

cisco1601#sh conf
version 11.3
service udp-small-servers
service tcp-small-servers
!
hostname cisco1601
!
enable password *****
!
username land-term password 0 *****
!
interface Ethernet0
 ip address 192.168.2.1 255.255.255.0
!
interface Serial0
 ip address 192.168.10.10 255.255.255.0
 encapsulation ppp
 no keepalive
 dialer dtr
 dialer-group 1
 ppp authentication chap
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.10.1
ip route 192.168.0.0 255.255.255.0 192.168.10.1
ip route 192.168.1.0 255.255.255.0 192.168.10.1
dialer-list 1 protocol ip permit
snmp-server community public R0
!
line con 0
 exec-timeout 0 0
line vty 0 4
 password *****
 login
!
end

cisco1601#

This example shows only the minimum necessary settings for confirmation. Further
details can be obtained from a Cisco dealer or Cisco’s home page (http://
www.cisco.com).

For other router see its operator’s manual.

• Network configuration depends on application and number of terminals used. Gener-

ally, setup is done on the user’s equipment.

• Setup depends on shipboard network and land network. For details contact the net-

work manager.

• We recommend that identification be exchanged between sender and receiver. Where

required used packet filtering and firewall.

• FURUNO will assume no responsibility for security-related problems.