Fujitsu IRMC S2/S3 Manual De Usuario

196

 

 iRMC 

S2/S3

●

System Identification LED

As long as the System Identification LED is on, the iRMC S3 will not 
enable 

 mode. 

●

Advanced Video Redirection (AVR)

If an AVR session is currently active, the iRMC S3 will not enable 

 mode. Once all AVR sessions have been finished (i.e, no AVR 

is active), the iRMC S3 will enable 

 mode. 

●

Remote Storage Server (RSS), Telnet/SSH Sessions

If an RSS session or an SSH/Telnet session is currently active, the 
iRMC S3 will not enable 

 mode. This prevents the remote 

interface connections to the iRMC S3 from being lost.

●

AC power fail

If an AC fail occurs and the PSU (Power Supply Unit) is in the 

 

mode or in the scheduled mode, the PSU will return to system 
standby. Depending on the power restore policy settings (see 

), the iRMC S3 determines whether the server is to be 

powered on. If the power restore policy is set to 

, an 

AC fail will never result in 

 mode. 

 mode may be reached 

after the next system power on.

Enables 

 mode and also displays the 

. The 

 allows 

you to specify a time interval at which the PSU is awoken from 

 

mode and thus both remote management and Wake-on-LAN (WOL) can 
be used. 

Figure 108: Power Options page, 0 Watt Technology Administration window

Defines the beginning (

) of the time interval.