Fujitsu IRMC S2/S3 Manual De Usuario
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
236
iRMC
S2/S3
Server Management Information - Configuring the server settings
Proceed as follows:
Ê
Check or uncheck the option(s) under
Enabled
for the
Software Watchdog
and/or
Boot Watchdog
.
Ê
If you have activated either of these options, you can configure the following
settings after
settings after
Software Watchdog
and/or
Boot Watchdog
:
Continue
No action is performed when the watchdog has expired, i.e. the
server continues to run. An entry is made in the event log.
server continues to run. An entry is made in the event log.
Reset
The server management software triggers a system reset.
Power Cycle
The server is powered down and immediately powered up again.
Ê
As appropriate, enter the time (in minutes) after which this action is to be
performed following
performed following
after timeout delay
.
I
The boot watchdog must wait until the system has been started. You
therefore have to specify a sufficient period for
therefore have to specify a sufficient period for
after timeout delay (1 -
100)
.
Ê
Click
Apply
button.
The configured settings are saved and the actions which have been
configured are performed in the appropriate circumstances.
configured are performed in the appropriate circumstances.