Fujitsu SK-TSC-1125S Manual De Usuario
SK-TSC-1125S User Guide
- 12 -
© Fujitsu Microelectronics Europe GmbH
2.5 I2C header (X1) pinout (ADA-16FX-TSC-LCD)
X5 Pin
Name
Connected to
Descripton
1
SCL
JP6, X3 Pin 1
I2C Serial Clock Line
2
SDA
JP4, X3 Pin 2
I2C Serial Data Line
3 GND
System
Ground
4
VCC
VCC for TSC and LCD
5
TINT
X3 Pin 5
Touch interrupt from TSC to MCU
6
GINT
X3 Pin 6
General Purpose interrupt from TSC to MCU
7
TOUT
X3 Pin 7
‘Beep’ Signal for Piezo Buzzer
(FMA1127-40N only)
8
RESET_N
X3 Pin 8
Reset Pin of TSC
9
reserved
X4 Pin 1
10
reserved
X4 Pin 2
X3 can be used to access the TSC signals, e.g. to route the Interrupts to an appropriate
external interrupt pin of the MCU.
external interrupt pin of the MCU.
2.6 LCD header (X5) pinout (ADA-16FX-TSC-LCD)
Pin
Name
Pin
Name
1 VSS 9
n/c
2 VDD 10
n/c
3 V0
(contrast) 11
D4
4 RS 12
D5
5 R/W 13
D6
6 E 14 D7
7
n/c
15
VLED (Backlight +)
8
n/c
16
VLSS (Backlight -)
The contrast for the (optional) LC display can be adjusted using RP1.
2.7 Further connection options
Using X3 (VCC), X4 (GND) and X2 (GPIO0 – 3), additional connections to the FMA1125 can
be made. X2 is connected to the digital input / output pins GPIO0-3 of the TSC. If these are
to be connected to external circuits, the on-board LEDs can be disabled by opening JP3.
be made. X2 is connected to the digital input / output pins GPIO0-3 of the TSC. If these are
to be connected to external circuits, the on-board LEDs can be disabled by opening JP3.