Fujitsu 2300 Manual De Usuario
1-6
Getting Started
Status Display
1
Icons appear in the Status display indicating the status of system functions such as
system power and battery charge level. The location of icons in the Status display is
shown in Figure 1-3.
system power and battery charge level. The location of icons in the Status display is
shown in Figure 1-3.
Figure 1-3 Status Display Icons
Table 1-1 shows how individual icons are displayed, and describes what the
variations of that display indicate. (If an icon is not displayed, it indicates that the
related system function is off or inactive.
variations of that display indicate. (If an icon is not displayed, it indicates that the
related system function is off or inactive.
Table 1-1 System Status Indications
Icon
System Function
Power icon.
Indicates system
state.
Indicates system
state.
Continuous:
Fully on (running)
Idle or Standby state (resumes activity when
pen activity or other input detected).
Idle or Standby state (resumes activity when
pen activity or other input detected).
Blinking:
Suspend-to-RAM mode.
Not displayed: Off state (when suspend button is configured
as a power button or when the system is shut
down with a software exit.)
Suspend-to-Disk mode
down with a software exit.)
Suspend-to-Disk mode
See “System States” in Chapter 2 for more details.
DC Input icon.
Displayed when DC power is connected and the system is fully
on or in suspend mode. Also displayed when the battery is
being charged.
on or in suspend mode. Also displayed when the battery is
being charged.
Power
DC Input
Charging
Battery
Gauge
Gauge
Hard Disk
Drive Access
PC Card
Slot 1
Access
Slot 1
Access
PC Card
Slot 2
Access
Slot 2
Access