Fujitsu CM71-00329-7E Manual De Usuario

158

CHAPTER2  Dependence Functions

■ Standard High-speed Communication

In the case of the emulator debugger (MB2100-01), when the standard high-speed communication is set to

the optimal value, the phase modulation mode is enabled, and high-speed communication can be performed

between the target and adapter. The standard high-speed communication is different in optimal value

depending on the MCU. For details, refer to the Hardware Manual for the product type you are using.

■ How to set

Perform the following method to control the standard high-speed communication.

●

Dialog

- [Frequency] tab in debug environment dialog

For details, refer to "4.7.2.3 Debug Environment" in "SOFTUNE Workbench Operation Manual".

●

Command

- SET FREQUENCY

For details, refer to "1.45 SET FREQUENCY" in "SOFTUNE Workbench Command Reference

Manual".

Note:

If the frequency is changed during high-speed communication mode, the MCU must be reset. The
frequency is changed after a reset is updated.