Fujitsu CM71-00329-7E Manual De Usuario
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
35
CHAPTER2 Dependence Functions
Target program size
CODE XX(KB)
DATA YY(KB)
Required RAM space (MB) = 20 + (XX / 64)
6 + (YY / 64) 1.5
However, RAM space larger than the above may be needed depending on program allocation. Allocate
memory space consecutive areas should be reserved as much as possible.
Example: Program with 1 MB of CODE and DATA sizes
Required RAM space (MB) = 20 + (1024 / 64)
6 + (1024 / 64) 1 / 5 = 140MB
■ Simulation Range
The simulator debugger simulates the MCU operations (instruction operations, memory space, interrupts,
reset, low power consumption mode, etc.) Peripheral I/Os, such as a timer, DMAC and serial I/O, other
than the CPU core of the actual chip are not supported as peripheral resources. I/O space to which
peripheral I/Os are connected is treated as memory space. There is a method for simulating interrupts like
timer interrupts, and data input to memory like I/O ports. For details, refer to the sections concerning I/O
port simulation and interrupt simulation.
•
Instruction simulation
•
Memory simulation
•
I/O port simulation (Input port)
•
I/O port simulation (Output port)
•
Interrupt simulation
•
Reset simulation
•
Low power consumption mode simulation