Fujitsu Siemens Computers Mini-Dock FPCPR25 Manual De Usuario
2
■
Video Port
Used for connecting a video monitor for displaying the
contents of the pen tablet screen.
Used for connecting a video monitor for displaying the
contents of the pen tablet screen.
■
Floppy Disk Drive Port
Used for connecting the optional floppy disk drive.
Used for connecting the optional floppy disk drive.
■
PS/2-style Keyboard Port
Used for connecting a PS/2-style keyboard connector.
Used for connecting a PS/2-style keyboard connector.
■
LAN Port
Used for connecting the pen tablet’s optional internal LAN
module to a LAN hub.
Used for connecting the pen tablet’s optional internal LAN
module to a LAN hub.
Notes: The mini-dock is required in order to use the internal
LAN module; there is no LAN port on the pen tablet.
A ferrite core is supplied with the mini-dock. To comply
with FCC Class B requirements, use the ferrite core on
the LAN cable (not supplied). Installation instructions
are included in the ferrite core packaging.
the LAN cable (not supplied). Installation instructions
are included in the ferrite core packaging.
■
USB Port
Used for connecting Universal Serial Bus-compliant
devices.
Used for connecting Universal Serial Bus-compliant
devices.
The viewing angle of the mini-dock can be adjusted to four
different positions. The bottom of the support bail on the
rear of the support platform (see Figure 3) snaps into one of
four slots. When storing the mini-dock, flip the bail up
against the back of the support platform to allow the plat-
form to lie flat.
different positions. The bottom of the support bail on the
rear of the support platform (see Figure 3) snaps into one of
four slots. When storing the mini-dock, flip the bail up
against the back of the support platform to allow the plat-
form to lie flat.
Note that the right-hand support can be removed to accom-
modate an optional wireless module (see Figure 4). To
remove the support, slide it upwards until it unlatches from
the support platform.
modate an optional wireless module (see Figure 4). To
remove the support, slide it upwards until it unlatches from
the support platform.
minidock.fm Page 2 Tuesday, August 21, 2001 3:30 PM