Contemporary Research IP-HDVR Manual De Usuario

 

Here’s a brief overview of the steps needed to integrate the IP-HDVR. 

 

Use Front Panel Setup to select output, format, RS-232 

parameters, and/or Ethernet settings. 

 

 

• 

Connect TV Antenna and/or Cable RF feeds. 

• 

TV Guide Setup will determine if tuner will 

search for off-air only or cable analog/digital and 

off-air digital channels. 

• 

After TV Guide Setup (p10), use Channel Menus 

to search, screen, and test broadcast channel 

operation. 

• 

Use TV Guide Channel Setup (p19) to filter 

channels displayed in the Program Guide. 

 

 

• 

Connect Cable Box AV output to: 

o

 

AV IN 1 inputs 

o

 

Cable input for AV on channel 2, 3, or 4 

• 

Connect G-Link IR cable to Cable Tuner IR Out  

• 

Attach IR emitter to underside of cable box, IR 

emitter below the box’s IR sensor 

• 

TV Guide Setup will link tuner to input and IR 

codes for cable box control 

• 

If you are not connecting a cable box, both AV 

inputs can be switched through the tuner 

 

 

• 

Connect high-definition display to Component, 

RGB, or DVI outputs (Use optional adapter to 

connect an HDMI source to the DVI output) 

• 

Connect video display to AV 1 or AV 2 outputs 

• 

The IP-HDVR can switch between HD and video 

outputs (no video is present when an HD video 

output is selected) 

• 

Connect audio equipment to Optical and/or 

analog outputs – AV 1 is fixed, AV 2 is variable 

• 

Audio is always present for all outputs 

 

• 

Connect Ethernet or RS-232 control cable to 

control system 

• 

Use front-panel menus to set IP address or RS-

232 parameters 

• 

The IP-HDVR can also provide pass-through 

bidirectional control of a display through the RS-

232 control port when the tuner is integrated via 

the Ethernet port 

• 

For IR control, connect external IR sensor or 

wired IR system control port to IR IN, discrete IR 

codes are available in AMX, Crestron, and Pronto 

format 

 

Research    10