Contec SEH-9450-LAS Manual De Usuario
3. Hardware Installations
18
SEH-9450-LAS
Keyboard / Mouse Connector: KB/MS1
The CPU card provides a standard PS/2 keyboard/mouse connector for attaching a PS/2 keyboard/mouse.
You will connect with an add-on cable for a PS/2 keyboard/mouse. You can select that plug a PS/2
mouse directly, PS/2 keyboard directly or both (use Y-cable) by jumper setting.
You will connect with an add-on cable for a PS/2 keyboard/mouse. You can select that plug a PS/2
mouse directly, PS/2 keyboard directly or both (use Y-cable) by jumper setting.
The PS2 Connector pin definition is shown below:
Table 3.9.
Keyboard / Mouse Connector (KB/MS1)
PIN No.
Function
1
KB Data
2 MS
Data
3 GND
4 +5VSB
5 KB
4 +5VSB
5 KB
Clock
KB/MS1
3
6
4
2
1
5
6 MS
Clock
CAUTION
The mouse and keyboard can be plugged into either PS/2 connector. Power to should be turned off
before a keyboard or mouse is connected or disconnected
before a keyboard or mouse is connected or disconnected
Adapter connector for Giga LAN: LAN1
This connector is for the LAN adapter that has LED indicate for 10/100/1000 Base-TX RJ45 (1X1) with
LEDs integrated magnetics connector. The follow table shows the pin assignments of this connector.
LEDs integrated magnetics connector. The follow table shows the pin assignments of this connector.
Table 3.10.
GIGA LAN
Function
PIN No.
100Base-TX
1000Base-T
1 TX+
TRD+(0)
2 TX- TRD-(0)
3 RX+
3 RX+
TRD+(1)
4 NC TRD+(2)
5 NC TRD-(2)
6 RX- TRD-(1)
7 NC TRD+(3)
5 NC TRD-(2)
6 RX- TRD-(1)
7 NC TRD+(3)
LAN1
Transmit
LED
Link
LED
8
1
8 NC TRD-(3)
Right LED: Link LED
Link: Green, Active: Blink
Left LED: Transmit LED
10M: Off, 100M Gree, 1000M: Orange
Link: Green, Active: Blink
Left LED: Transmit LED
10M: Off, 100M Gree, 1000M: Orange