Contec SEH-9450-LAS Manual De Usuario
8. BIOS Setup
SEH-9450-LAS
43
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each hard disk
drive.
drive.
Use the legend keys to navigate through this menu and exit to the main menu. Use Table 3 to configure
the hard disk.
the hard disk.
Table 8.3.
IDE Adapters configurations
Item
Options
Description
IDE HDD Auto-detection
Press Enter
Press Enter to auto-detect the HDD on this channel. If
detection is successful, it fills the remaining fields on this
menu.
detection is successful, it fills the remaining fields on this
menu.
IDE Channel 0/2
Master/Slave
None
Auto
Manual
Selecting ‘manual’ lets you set the re-maining fields on this
screen. Selects the type of fixed disk. "User Type" will let
you select the number of cylinders, heads, etc.
Note: PRECOMP=65535 means NONE !
screen. Selects the type of fixed disk. "User Type" will let
you select the number of cylinders, heads, etc.
Note: PRECOMP=65535 means NONE !
Capacity
Auto Display your disk
drive size
Disk drive capacity (Approximated). Note that this size is
usually slightly greater than the size of a formatted disk
given by a disk checking program.
usually slightly greater than the size of a formatted disk
given by a disk checking program.
Access Mode
CHS
LBA
Large
Auto
Choose the access mode for this hard disk
The following options are selectable only if the ‘IDE Channel 0/2 Master/Slave’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this hard disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
**** Warning: Setting a value of 65535 means no hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track