Contec SEH-9450-LAS Manual De Usuario
8. BIOS Setup
SEH-9450-LAS
61
On Chip Serial ATA Setting
Table 8.10.
On Chip Serial ATA setting Selections
Description Choice
SATA Mode
Allow you setting the SATA hard disk mode to IDE, RAID or
AHCI mode.
AHCI mode.
On-Chip Serial ATA
Disabled: Disabled SATA Controller.
Combined Mode: PATA and SATA are combined.
Maximum of 4 IDE devices can use 2 for SATA 2 for PATA.
Enhanced Mode: Enable both SATA and PATA. Maximum of
4 IDE devices are supported.
SATA Only: SATA is operating in legacy mode.
Combined Mode: PATA and SATA are combined.
Maximum of 4 IDE devices can use 2 for SATA 2 for PATA.
Enhanced Mode: Enable both SATA and PATA. Maximum of
4 IDE devices are supported.
SATA Only: SATA is operating in legacy mode.
SATA PORT Speed Settings
Disable the SATA Port Speed setting or force to GEN I /
GEN II.
GEN II.
PATA IDE Mode
The fix setting of the PATA IDE Mode is secondary.