Contec SEH-9450-LAS Manual De Usuario
8. BIOS Setup
SEH-9450-LAS
87
POST Codes
POST
(hex)
Description
CFh
Test CMOS R/W functionality.
C0h
Early chipset initialization:
-Disable shadow RAM
-Disable L2 cache (socket 7 or below)
-Program basic chipset registers
-Disable shadow RAM
-Disable L2 cache (socket 7 or below)
-Program basic chipset registers
C1h
Detect memory
-Auto-detection of DRAM size, type and ECC.
-Auto-detection of L2 cache (socket 7 or below)
-Auto-detection of DRAM size, type and ECC.
-Auto-detection of L2 cache (socket 7 or below)
C3h
Expand compressed BIOS code to DRAM
C5h
Call chipset hook to copy BIOS back to E000 & F000 shadow RAM.
0h1
Expand the Xgroup codes locating in physical address 1000:0
02h Reserved
03h
03h
Initial Superio_Early_Init switch.
04h Reserved
05h
1. Blank out screen
2. Clear CMOS error flag
2. Clear CMOS error flag
06h Reserved
07h
Clear 8042 interface
Initialize 8042 self-test
Initialize 8042 self-test
08h
Test special keyboard controller for Winbond 977 series Super I/O chips.
Enable keyboard interface.
Enable keyboard interface.
09h Reserved
0Ah
Disable PS/2 mouse interface (optional).
Auto detect ports for keyboard & mouse followed by a port & interface swap (optional).
Reset keyboard for Winbond 977 series Super I/O chips.
Auto detect ports for keyboard & mouse followed by a port & interface swap (optional).
Reset keyboard for Winbond 977 series Super I/O chips.
0Bh Reserved
0Ch Reserved
0Dh Reserved
0Eh
0Ch Reserved
0Dh Reserved
0Eh
Test F000h segment shadow to see whether it is R/W-able or not. If test fails, keep beeping the speaker.
0Fh Reserved
10h
Auto detect flash type to load appropriate flash R/W codes into the run time area in F000 for ESCD & DMI
support.
support.
11h Reserved
12h
Use walking 1’s algorithm to check out interface in CMOS circuitry. Also set real-time clock power status,
and then check for override.
and then check for override.
13h Reserved
14h
14h
Program chipset default values into chipset. Chipset default values are MODBINable by OEM customers.
15h Reserved
16h
16h
Initial Early_Init_Onboard_Generator switch.
17h Reserved
18h
18h
Detect CPU information including brand, SMI type (Cyrix or Intel®) and CPU level (586 or 686).
19h Reserved
1Ah Reserved
1Ah Reserved
1Bh
Initial interrupts vector table. If no special specified, all H/W interrupts are directed to
SPURIOUS_INT_HDLR & S/W interrupts to SPURIOUS_soft_HDLR.
SPURIOUS_INT_HDLR & S/W interrupts to SPURIOUS_soft_HDLR.
1Ch Reserved
1Dh
1Dh
Initial EARLY_PM_INIT switch.
1Eh Reserved