Compatible Systems INTRAPORT 2 Manual De Usuario

This chapter provides a step-by-step outline of the minimum required 
parameters which must be configured into the device for proper opera-
tion. Detailed information on the meaning of the server’s parameters is 
provided in the CompatiView Management Software Reference Guide 
and the Text-Based Configuration and Command Line Management 
Reference Guide. You should use this list as a starting point to look up 
more specific information in the other documents. 

There are a number of settings which are optional, in the sense that they 
are not required for all installations. These settings are not covered in 
this chapter.

v Note: This Basic Configuration Guide does not include information 

on setting up packet filters. See the CompatiView Management 
Software Reference Guide regarding IP, IPX and AppleTalk 
packet filters for more information. Refer to the VPN Client Refer-
ence Guide for information on the installation and operation of the 
VPN Client software

The IntraPort 2/2+ can be set up in two different ways. The recom-
mended setup is to use both Ethernet ports so that it operates in parallel 
with your existing firewall or proxy server and serves as the IPSec 
component of your security system. In this setup, Ethernet 0 serves as 
an IP, IPX and AppleTalk router port, while Ethernet 1 receives and 
sends only IPSec packets. The other option is to set up the server behind 
your Internet access router/firewall using Ethernet 0 only. This guide 
includes basic instructions for both setups.