Compaq 340622-002 Manual De Usuario

B-1   Electrostatic

Compaq SLR Tape Drive User Guide

To prevent damaging the system, be aware of the precautions you need to
follow when setting up the system or handling parts. A discharge of static
electricity from a finger or other conductor may damage system boards or
other static-sensitive devices. This type of damage may reduce the life
expectancy of the device.

To prevent electrostatic damage, observe the following precautions:

■ 

Avoid hand contact by transporting and storing products in static-safe
containers.

■ 

Keep electrostatic-sensitive parts in their containers until they arrive at
static-free workstations.

■ 

Place parts on a grounded surface before removing them from their
containers.

■ 

Avoid touching pins, leads, or circuitry.

■ 

Always be properly grounded when touching a static-sensitive
component or assembly.

There are several methods for grounding. Use one or more of the following
methods when handling or installing electrostatic-sensitive parts:

■ 

Use a wrist strap connected by a ground cord to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm 

 10 percent resistance in the ground cords. To provide

proper ground, wear the strap snug against the skin.

■ 

Use heel straps, toe straps, or boot straps at standing workstations.
Wear the straps on both feet when standing on conductive floors or
dissipating floor mats.

■ 

Use conductive field service tools.