Classe Audio Surround Sound Processor SSP-800 Manual De Usuario

53

Th

  e remote control supplied with the SSP-800 has four function keys (Fkeys), 

each of which gives you instant access to a specifi c system function that might 
otherwise be buried in the menu system.

For example, if you use the balance control frequently, you may want to consider 
programming one of the Fkeys to directly access the balance control. By saving 
the balance control as an Fkey function, you do not need to access the menus 
to change the parameter..

Th

  e remote control F1 to F4 buttons correspond to the Function Keys displayed 

on the touchscreen. Select the Function Key that you would like to program, 
Th

  en to select the one you want simply scroll through the list (by touching 

either the up or down arrows on the right), and then touch the specifi c function 
you want that Fkey to perform.

important note on Fkey use

All Classé remote controls provide these same four Fkeys, so that you need not 
worry about which remote you happen to pick up. Th

 us F1 on the Surround 

Sound Processor’s remote control sends the same infrared signal as F1 on the CD 
player’s remote control.

While this is intended to minimize confusion amongst diff erent remotes (since 
this aspect of them will all perform identically), you should take care when 
assigning diff erent functions on diff erent components to the same Fkey. Doing 
so can result in two components doing two diff erent things at once, in response 
to a single press of a button on the remote control. Th

  is can sometimes be 

useful. As an example, F1 could set the Surround Sound Processor to the CD 
input, and also set the CD player to Play, both from the press of a single Fkey.