Cisco Systems 3527 PRI Guía De Instalación

The IP address of the router that the Cisco Unified Videoconferencing 3527 PRI Gateway unit will 
use to communicate across the network

For an H.323 environment, the IP address of the H.323 gatekeeper with which you want the 
Cisco Unified Videoconferencing 3527 PRI Gateway unit to register

Available IP network ports on the switch for the Cisco Unified 
Videoconferencing 3527 PRI Gateway unit

A grounded AC power outlet

A 10BaseT or 100BaseT LAN cable

Ambient room temperature range of 32

o

 to 104

o

F (0

o

 to 40

o

C)

Non-condensing relative humidity range of 5% to 90%

The Cisco Unified Videoconferencing 3522 BRI Gateway prepares the signaling for outbound 
videoconference calls that are transmitted over Integrated Services Digital Network (ISDN) networks. 
For videoconference information to arrive at its destination, you must work with the BRI service 
provider to ensure that the gateway and the ISDN service are compatible. You must gather information 
about the service provider equipment and provide the service provider with information about the 
gateway.

Before you order BRI service or connect the Cisco Unified Videoconferencing 3522 BRI Gateway to 
your existing BRI service, we suggest that you gather the following information. 

Identify the ISDN provider you want to use as your Local Exchange Carrier (LEC) for local calls.

The LEC is the local telephone company that provides ISDN services for your local calling area and to 
which your equipment connects.

Identify the ISDN provider you want to use as your Interexchange Carrier (IEC) for long-distance calls.

The IEC and the LEC are different companies. Often the LEC will contact the IEC and provision 
long-distance service for you. Verify that your LEC performs this task, and contact an IEC if the LEC 
does not. 

Determine how many BRI lines you want to connect to the gateway. 

Identify the ISDN equipment or signaling format your LEC uses.

Determine whether you want to use layer 1 line hunting.

Have your ISDN service provider turn off the following switch settings:

Packet Mode Data on the D channel

Terminal Display Text

EKTS

Call Appearances