Cisco Systems 3.2 Manual De Usuario
D-3
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Appendix D System Messages and Access Point LED Patterns
System Messages
LRADIF_CURRENT_CHANNEL_CHANGED
Informational message.
LRADIF_RTS_THRESHOLD_CHANGED
Informational message.
LRADIF_ED_THRESHOLD_CHANGED
Informational message.
LRADIF_FRAGMENTATION_THRESHOLD_
CHANGED
CHANGED
Informational message.
RRM_DOT11_A_GROUPING_DONE
Informational message.
RRM_DOT11_B_GROUPING_DONE
Informational message.
ROGUE_AP_DETECTED
May be a security issue.Use maps and trends to
investigate.
investigate.
ROGUE_AP_REMOVED
Detected rogue access point has timed out. The
unit might have shut down or moved out of the
coverage area.
unit might have shut down or moved out of the
coverage area.
AP_MAX_ROGUE_COUNT_EXCEEDED
The current number of active rogue access points
has exceeded system threshold.
has exceeded system threshold.
LINK_UP
Positive confirmation message.
LINK_DOWN
Port may have a problem or is administratively
disabled.
disabled.
LINK_FAILURE
Port may have a problem or is administratively
disabled.
disabled.
AUTHENTICATION_FAILURE
Attempted security breech. Investigate.
STP_NEWROOT
Informational message.
STP_TOPOLOGY_CHANGE
Informational message.
IPSEC_ESP_AUTH_FAILURE
Check WLAN IPSec configuration.
IPSEC_ESP_REPLAY_FAILURE
Check for attempt to spoof IP Address.
IPSEC_ESP_POLICY_FAILURE
Check for IPSec configuration mismatch between
WLAN and client.
WLAN and client.
IPSEC_ESP_INVALID_SPI
Informational message.
IPSEC_OTHER_POLICY_FAILURE
Check for IPSec configuration mismatch between
WLAN and client.
WLAN and client.
IPSEC_IKE_NEG_FAILURE
Check for IPSec IKE configuration mismatch
between WLAN and client.
between WLAN and client.
IPSEC_SUITE_NEG_FAILURE
Check for IPSec IKE configuration mismatch
between WLAN and client.
between WLAN and client.
IPSEC_INVALID_COOKIE
Informational message.
RADIOS_EXCEEDED
Maximum number of supported Cisco Radios
exceeded. Check for controller failure in the same
Layer 2 network or add another controller.
exceeded. Check for controller failure in the same
Layer 2 network or add another controller.
SENSED_TEMPERATURE_HIGH
Check fan, air conditioning and/or other cooling
arrangements.
arrangements.
Table D-1
System Messages and Descriptions (continued)
Error Message
Description