Cisco Systems 2.7 Manual De Usuario
2-11
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter 2 Preparing to Install WLSE 1130-19 Hardware
Precautions for Products with Modems, Telecommunications, or Local Area Network Options
Precautions for Products with Modems,
Telecommunications, or Local Area Network
Options
Telecommunications, or Local Area Network
Options
Observe the following guidelines when working with options:
•
Do not connect or use a modem or telephone during a lighting storm. There
may be a risk of electrical shock from lightning.
may be a risk of electrical shock from lightning.
•
Never connect or use a modem or telephone in a wet environment.
•
Do not plug a modem or telephone cable into the Ethernet connector.
•
Disconnect the modem cable before opening a product enclosure, touching or
installing internal components, or touching an uninsulate4d modem cable or
jack.
installing internal components, or touching an uninsulate4d modem cable or
jack.
•
Do not use a telephone line to report a gas leak while you are in the vicinity
of the leak.
of the leak.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
top with the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
or servicing the unit in the rack.
Statement 1006