Ciprico 6500 Manual De Usuario
6500 Disk Array User’s Guide
21020690 B
Chapter 3 Display/Operation Panel
ARRAY INFORMATION
Page 3 - 15
ARRAY
INFORMATION
INFORMATION
From
)81&7,21 6(/(&7, use the left/right arrow keys to select $55$<
,1)250$7,21 (see “Menu Structure (3 of 5—Array Info & Rebuild)” on page
3-8). These display-only selections let you view the following array
information:
3-8). These display-only selections let you view the following array
information:
),50:$5(
7(03(5$785( 6(16256
&$3$&,7<
,1,7,$725 ,1)250$7,21
0(*O0(7(5
7(03(5$785( 6(16256
&$3$&,7<
,1,7,$725 ,1)250$7,21
0(*O0(7(5
FIRMWARE
The
),50:$5( menu gives you access to three firmware parameters: firmware
revision level (
),50:$5( 5(9); the results of a checksum test (7(67
&+(&.6806); and a display of the hexadecimal tallies of the checksum test
(
(
',63 &+(&.6806).
FIRMWARE REV
Displays the revision level of the firmware residing in the array’s firmware
PROM device. Two submenus display the date and time associated with the
firmware revision, and a third submenu displays the model number of the array.
PROM device. Two submenus display the date and time associated with the
firmware revision, and a third submenu displays the model number of the array.
TEST CHECKSUMS
This item and its submenu display, as
3$66 or )$,/, the results of a test in
which expected checksums are compared to actual calculated checksums of the
current contents of the Primary (PR) firmware buffers, and the BIST buffer.
Matching checksums for a buffer verify that the contents of that buffer have
not changed and it passes the test.
current contents of the Primary (PR) firmware buffers, and the BIST buffer.
Matching checksums for a buffer verify that the contents of that buffer have
not changed and it passes the test.
DISP CHECKSUMS
This item is similar to the
7(67 &+(&.6806 item except that, instead of
showing a
3$66 or )$,/ condition, the actual checksums are displayed in
hexadecimal. Two submenu items are associated with
',63 &+(&.6806. In
the second submenu item, there are four entries: at the upper left, the expected
checksum from the primary buffer appears; at the lower left, the calculated
checksum for the primary buffer is shown; at the upper right, the expected BIST
checksum appears; and at the lower right, the calculated BIST checksum
appears.
checksum from the primary buffer appears; at the lower left, the calculated
checksum for the primary buffer is shown; at the upper right, the expected BIST
checksum appears; and at the lower right, the calculated BIST checksum
appears.
TEMP
SENSOR
Displays the temperature detected by the sensor (on the controller board) in
degrees Celsius and Fahrenheit.
degrees Celsius and Fahrenheit.