Cino MP3200 Manual De Usuario

Getting Started 

Charging the Battery   

 
(1) Plug the power supply unit into the appropriate AC wall 

socket, then connect the DC plug of the power supply unit to 
MP3200(BT) DC power jack.   

a.  Use of an unapproved power supply unit could damage 

the battery pack or MP3200(BT). 

b.  For more information on the battery pack, please refer to 

“Extending Battery Life” and “Battery Disposal” for details.

 

 
(2)  Activate MP3200(BT) by pressing the POWER button. You 

will hear 3 short beeps in ascending tone to indicate 
power-on status. The LED indicators will flash 5 times to 
indicate current battery status. 

 
(3)  During battery status indication, the LED4 indicator will go 

on steady green after the LED indicators flash 3 times. This 
means MP3200(BT) is in charging state. You may check the 
battery status by pressing the POWER button during battery 
charging. While pressing the POWER button, the LED 
indicators will flash three times to indicate the battery status. 

 
 
 
 

 

Please refer to following table for detailed battery status.   

 

Green

Green

Green

Green 

More than 90% of battery remains

Green

Green

Green

 

More than 70% of battery remains

Green

Green

  

More than 50% of battery remains

Green

   

More than 20% of battery remains

Orange

   

Less than 20% of battery remains 

Red 

   

Less than 10% of battery remains

 

a.  The MP3200(BT) gives 1 warning beep at 5 seconds 

intervals when the battery power is less than 20%.   

b.  The MP3200(BT) gives 2 warning beeps at 5 seconds 

intervals when the battery power is less than 10%.

 

 
(4)  Following the battery status indication, the LED1 indicator of 

MP3200(BT) will flash green(red) at 2 seconds intervals. 
The MP3200(BT) is now ready to be connected. 

 

The MP3200(BT) battery pack has to be charged about 4~5 
hours for the first time. You may check the battery status by 
pressing the POWER button. 

4 

 

MP3200 User’s Guide