Cino MP3200 Manual De Usuario

Maintenance and Troubleshooting 

 
The MP3200(BT) should be cleaned after printing a few rolls of 
media or if there are voids in the printout. Thus, cleaning 
MP3200(BT) is a necessary maintenance activity to ensure 
optimum performance and life. Clean the Printer areas by using 
cleaning pen or cotton swabs moistened with isopropyl alcohol. 
Please refer to following procedure and figure to clean the 
Printer : 

 
(1)  Power off MP3200(BT). 
(2)  Open the media compartment cover. 
(3)  Remove the media roll. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Print Head 

Use the cleaning pen or a cotton swab moistened with 
isopropyl alcohol to clean the surface of the print head 
from end to end. 

Tear Bar 
 

Use the cleaning pen or a cotton swab moistened with 
isopropyl alcohol to clean the tear bar. 

Platen Roller

Rotate the platen roller and clean the surface of the 
platen roller with cleaning pen or a cotton swab 
thoroughly. 

Interior 
 
 

Blow the paper dust by using a can of compressed air 
or by vacuuming. Ensure the paper sensor windows are 
free of dust. 

Exterior 

Use soft cloth moistened with water to clean the 
exterior of the printer. 

Paper Sensor 

Platen Roller 

 

Tear Bar 

Print Head 

a.  Don’t use sharp objects to clean the print head. This may 

result in damage to the Printer. 

b. Let the print head cool to room temperature prior to 

cleaning, protecting yourself from burns. 

c.  The tear bar has sharp edges. Please be careful when 

cleaning the tear bar to avoid possible injury. 

24 

 

MP3200 User’s Guide