FARGO electronic HDP600 CR100 Manual De Usuario
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)
5-3
Introduction
The Ethernet option includes the Ethernet port and the internal Printer Server.
Printer Management: The Printer Driver provides bi-directional status information so
you can monitor and manage the Printer just as you would any other networked Printer.
Compatibility: The Fargo Ethernet option provides compatibility with TCP/IP and 802.3
Ethernet protocols with an IEEE 802.3 10/100Base-T Ethernet female RJ45 connector.
Application: With the Ethernet Option properly installed and configured, these Printers
are able to print in the same manner as a Printer directly connected to the PC via a USB
interface.
interface.
Technical Specification - Ethernet Option
Here are the system requirements for Ethernet.
Caution: For safety purposes, Ethernet is not intended for a direct connection
outside of the building.
Function
Requirement
Network
An IEEE 802.3 10/100 Base-T Ethernet network is required.
Printer
A Fargo Printer with the Ethernet option installed is required.
Printer
Configuration
Configuration
Since TCP/IP is used for the network communication, the Printer
must be configured with an IP address and a subnet mask (before it
can be seen on the network).
must be configured with an IP address and a subnet mask (before it
can be seen on the network).
An additional network setting for the Default Gateway can also be
configured, which allows communication across the subnets.
configured, which allows communication across the subnets.
Host Computer
A PC running Windows 2000 / XP / Server 2003 connected to the
network is required.
network is required.
Host Printer
Driver
Driver
The host PC must have installed the correct Printer Driver with
Ethernet support. (Note: This Driver must be configured for printing
to the IP address of the Printer.)
Ethernet support. (Note: This Driver must be configured for printing
to the IP address of the Printer.)