Chauvet Utility Trailer A Manual De Usuario

 
4. Operating Instructions 

10 

11/29/2010 4:14 PM  

 

 

 

The COLORrail™

 

fixture uses up to 26 DMX channels. In this DMX configuration/personality, the 

highest channel that the fixture may be set to in order to function properly is 487. Any address 

higher than this will prevent access to all of the channels, while in this mode; however, if you 

desire to use one of the other DMX channels configurations (personalities), then please consider 

the total DMX channels when selecting a DMX address. 

 

The COLORrail™

 

fixture uses 26, 14, 7, 4, 3, or 2 DMX channels, depending on the selected 

DMX configuration (personality). If this is your first time using DMX, we recommend reading the 

“DMX Primer” section in the “Appendix”. 

 

 

 

 

 

This is the operating mode which will allow for control with an external DMX controller. You must 
set the starting address for this mode. If this is your first time using DMX, then it is recommended 
that you refer to the “DMX Primer” section in the “Appendix” of this manual. 
 

1. Press 

<MENU> until 

d001~512

 

appears on the LED screen.

 

2. Using 

<UP> and <DOWN>, select the starting address.

 

3. Press 

< ENTER > until one of the DMX personalities appears on the LED screen 

(

2-CH, 3-CH, 4-CH, 7-CH, 14-CH, 26-CH

).

 

4. Using 

<UP> and <DOWN>, select the desired DMX personality.

 

5. Press 

<ENTER>.

 

 

 

 

 

 

 

 

 

This mode allows a single unit, the master, to operate in one of the standalone modes, while one 

or more fixtures, slaves, synchronize their responses to the master. 

 

Master: 

The master fixture may be set in any of the following modes: Program Selection, Automatic 
Mode, Static Color, or Sound Mode. 

 

Slave: 

1. Press 

<MENU> until 

SLAu

 

appears on the LED screen.

 

2. Press 

< ENTER >.